The most versatile filling equipment is certainly pressure filling equipment. By design, pressure fillers are used for light oils and foamy products
When products foam during the fill cycle, regular gravity fillers are no longer suitable. Pressure that builds in the container need to be withdrawn back into the overflow tank. This can only be accomplished by sealing the top of the container with a soft rubber gasket. The pressure overflow filler "dives" the nozzle into the spout of your container, sealing the opening of the container and opening the nozzle for the fill cycle to begin. The fill cycle of the overflow filler is time bound, meaning, a preset time is allocated to fill. Naturally, not all nozzles fill at the same speed and therefore one bottle might be full before the other. Now, the nozzle pumps liquid at the bottom and withdraws it again from the center of the nozzle until the cycle time is completed.
This assures an even fill level across all heads of your pressure filler.

MODEL 2101-A AUTOMATIC INLINE PRESSURE BOTTLE FILLER

• All Stainless Steel Construction with 304 S.S. Contact Parts,
• 6 - Stainless Steel. Fill Nozzles
• 30 Gallon Covered S.S. Reservoir / Return Tank with Automatic Level Control   
• 316 S.S. Dairy Quality Sanitary Centrifugal Pump with variable Speed Drive
• 10' S.S. Conveyor Bed with 4 ½" wide Delrin Table Top Chain
• Wrenchless Independent Dual Rails
• Adjustable Pneumatically Operated Nozzle Platform
• All Pneumatic Simple to operate Logic Controls



























              Expandable up to a total of 12 nozzles